Linux - SoftwareThis forum is for Software issues.
Having a problem installing a new program? Want to know which application is best for the job? Post your question in this forum.
Notices
Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
If you have any problems with the registration process or your account login, please contact us. If you need to reset your password, click here.
Having a problem logging in? Please visit this page to clear all LQ-related cookies.
Get a virtual cloud desktop with the Linux distro that you want in less than five minutes with Shells! With over 10 pre-installed distros to choose from, the worry-free installation life is here! Whether you are a digital nomad or just looking for flexibility, Shells can put your Linux machine on the device that you want to use.
Exclusive for LQ members, get up to 45% off per month. Click here for more info.
I have been trying to install RH 7.1 for the last 11 hours. This is my first experiance with Linux.
The box is a Pentium 120Mhz, 2.1 GB, 48 MB, WIN98, Ethernet, CDROM, Floppy.
I used rawrite to put bootnet.img on a floppy. When I boot the machine in normal mode it fails with a kernal panic.
When I use expert mode, it tells me I must have 20MB RAM for FTP or HTTP install (but I have 48???). If I go the NFS route, I can enter all my IP info, but I don't have the NFS info to enter.
I found one at 129.79.6.139 and /linux/redhat/redhat/linux/7.1/en/os/i386 When I try that, it tells me that it can't mount that location.
I have tried using mem=32M (and 16M, and 27M) at the boot prompt, but that didn't make any diferrence. I also tried to re-arrange the SIMMs in the motherboard, and that didn't make any diferrence either.
I've spent most of the time reading every webpage I could find that might help, to no avail.
Are there any useful details in the kernel panic (probably not!). Post if its possible - you can often use CTRL+PgUP to scroll back up.
You can always try removing any hardware that isn't essential as it may be a piece hardware causing the panic. Unfortunately I'm not from the Redhat camp so can't be that much more use... Personally I'd take out the hardware (esp. the network card) and try a normal install again.
VFS: Cannot open root device "" or 08:41
Please append a correct "root=" boot option
Kernal panic: VFS: Unable to mount root fs on 08:41
Note that at this point, the box is locked, and I have to go for a cold reboot.
All the output prior to that is a bit cryptic to me (being new to Linux) but it appears to be detecting hardware and loading drivers. It is loading my floppy as fd0. In fact, all output prior to the error appears to be successful commands.
I am going to reboot in to DOS and try and run memmaker or msd and see if it will shed any light on potential problems.
I did have a fellow tell that I am probably not going to find a publicly accessible NFS server, so I think I need to focus on fixing this kernal panic.
Thanks, I'm goin to keep trying to figure this out. If this info helps you help me, please let me know.
Did you try booting from the cdrom. I usually have better luck doing that. You may want to check and see if there are any BIOS updates available as well. You could also boot to dos and then use the autoboot command to start the install process.
After many, many frustrating misqueues at installing Red Hat 7.1, I did the following:
Note that, prior to this install, I had already used System Commander to make room for Linux. My Linux partition was beyond cylinder 1047, which causes Linux 7.0 to puke, but the following procedure worked for Linux V7.1.
1.) Using System Commander, I erased the Linux data that I had previously installed (backup was not necessary, as all I had on my disk was old Linux stuff that I didn't want).
2.) I cold-booted my machine with the #1 Linux install disk in my CD
3.) The Linux install auto-started and was pretty intuitive. When I was asked if I wanted to make a boot disk, I said yes.
4.) I let Linux figure out what to do with my Hard Drive. It put the boot partition, swap partition and main partition in the right places and away we go.
I got RH 7.1 installed. Unfortunately, my onboard video is not supported. Anyway, RH 7.1 wasn't recognizing my memory SIMMs (72 pin 70 ns). The solution for RH 7.1 is to explicitly tell Linux where your memory is. The boot: parameters are (for a box with 48M RAM):
linux mem=exactmap mem=640K@0 mem=47M@1
for 64M RAM, the last parameter would be: mem=63M@1
I spent close to 11 hours trying to install RedHat 7.1 on a Compaq ProSignia 300.
I noted someone else's post in this thread, but found I had to add M at the end of the recommended option string - then it finally worked. With out the M I kept receiving message about VFS unable to mount root. Please add a valid root= .
linux mem=exactmap mem=640K@0 mem=63M@1M
in lilo it would be
append="mem=exactmap mem=640K@0 mem=63M@1M "
Great post! I too have a CPQ Prosig 300. Mine is a P120 w/128MB. I was having a very tough time with the same exact kernel panic error when I was installing RH 7.1. I couldn't find any hits on Compaq's or RedHat's websites, and then I found your post (Thank you Google!). Using linux mem=127M@1M as the last parameter worked like a charm!
I am a newbie but am trying to get the hang of this Linux thing...
it then goes and unmounts everything and says its okay for me to reboot. I'm running a dual processor compaq proliant 6500. I'm thinking it might be the ARRAY system?? This system has 9 scsi hard drives, in and ARRAY system, could it be that redhat isn't recognizing this in installation?
can anyone please please help me out?!?! I've updated the firmware, and selected the UNIX ware as the OS since linux isn't even an option. I've been trying everything for the past 3 days, i can't seem to get it, anyone please please please please help on this.
I did indeed leave the last 'M' off of my solution to specify memory. Blonde moment I guess.
Rich - The original goal was to do an FTP install from a Redhat mirror, as I have a 600kb/s connection (then NFS). By the time I had figured out the memory solution, I had already gone out and bought the CD's.
akebono - The only thing I could suggest is to read the raid Howto (do a search).
Originally posted by marktaff I have been trying to install RH 7.1 for the last 11 hours. This is my first experiance with Linux.
The box is a Pentium 120Mhz, 2.1 GB, 48 MB, WIN98, Ethernet, CDROM, Floppy.
I used rawrite to put bootnet.img on a floppy. When I boot the machine in normal mode it fails with a kernal panic.
When I use expert mode, it tells me I must have 20MB RAM for FTP or HTTP install (but I have 48???). If I go the NFS route, I can enter all my IP info, but I don't have the NFS info to enter.
I found one at 129.79.6.139 and /linux/redhat/redhat/linux/7.1/en/os/i386 When I try that, it tells me that it can't mount that location.
I have tried using mem=32M (and 16M, and 27M) at the boot prompt, but that didn't make any diferrence. I also tried to re-arrange the SIMMs in the motherboard, and that didn't make any diferrence either.
I've spent most of the time reading every webpage I could find that might help, to no avail.
I would appreciate any help. Thanks.
Mark
Dear Friend,
Since I find that u have problem booting with floppy and doing installation why don't u try using the Boot with CDROM option from ur system BIOS. The procedure is as stated.
1. Switch on the P.C, press DEL key to invoke the BIOS Setup.
2. In the Bios u shall find Boot Option. Select primary boot device as " Boot from CDROM
3. Save the Settings by pressing F10 key.
4. Insert the Redhat CD and let the system boot.
5. Select Basic installation and now the installation should go through smooth.
In Case u still have any problem MAIL me harshit_1903@rediffmail.com & i will definately help u at the point where u r stuck.
I had the same problem, but none of solutions writen above solved my problem!
The problem I was speculating RAM, because I already instaled linux on this PC once before. The only difference to now was, that I added some RAM.
That RAM was working OK with Windows, but under Linux it had some difficulties.
After I changed RAM modules, I had no further problem!
The http install works well if you have no cdrom and you want to use a system with a web server running to install from. Personal Web server on the windows cd will work fine.
I would not do the ftp install from the internet, because it can take hours and if it disconnects you have to start over. It's better to download the files first.
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know.